Chemical Engineering

Permanent URI for this collectionhttps://uwspace.uwaterloo.ca/handle/10012/9904

This is the collection for the University of Waterloo's Department of Chemical Engineering.

Research outputs are organized by type (eg. Master Thesis, Article, Conference Paper).

Waterloo faculty, students, and staff can contact us or visit the UWSpace guide to learn more about depositing their research.

Browse

Browsing Chemical Engineering by Author "Almarzooqi, Khalfan"

Filter results by typing the first few letters
Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Graphene Based Membranes for High Salinity, Produced Water Treatment by Pervaporation Separation
    (University of Waterloo, 2023-03-13) Almarzooqi, Khalfan
    Petroleum industries generate huge volumes of wastewater that is associated with oil and gas during extraction, known as produced water. It accounts for 98% of the amount extracted, and comprises diverse pollutants of salts, suspended solids, dissolved organic solutes, and dispersed oils; that require to be safely treated before being disposed to the environment, or reused for various beneficial applications. Nowadays, graphene-based membranes have shown potential as a membrane material due to their high performance and stability features. This research demonstrated the use of graphene oxide membranes supported on polyethersulfone films (GO/PES) for high salinity water, simulated produced water model (PWM), and PWM with simulated foulants treatment via the pervaporation separation technology. The membranes showed the highest water flux of 47.8 L m-2 h-1 for NaCl solutions in pervaporation testing operated at 60 oC, and salt and organic rejections of 99.9% and 56%, respectively. In addition, the membranes were tested for long-term pervaporation for 72 hours and showed a decline of 50–60% from the initial flux in the worst-case-scenario. Moreover, in-depth investigation of the Zn2+ crosslinker showed a hydrolysis reaction to Zn(OH)2, with the progress of the long-term pervaporation, in which much of it is being leached out. Consequently, since GO membranes are not stable in water, it remains challenging to be utilized in the industry. A more stable GO membrane in aqueous phase was proposed. The membrane’s stability was enhanced by divalent and trivalent metal cations of Zn2+ and Fe3+ crosslinkers, respectively, and partial reduction under vacuum. Two orders of fabrications were investigated of either crosslinking rGO (method I) or reducing M+–rGO (method II). The prepared membranes were examined for their characterization and performance. Fe3+–rGO prepared by method II showed the best organic solute rejection of 69%. Moreover, long-term pervaporation experiment was performed for 12 hours for Zn2+–rGO membranes, and revealed a drop in flux of 6% only, while Zn2+–GO membrane had a drop in flux of 24%. Additionally, the stability of the membranes was tested via an abrasion method using a rotary wheel abrader. The conducted experiments revealed that Fe3+–rGO membranes had the maximum mechanical integrity with an abrasion resistance of 95% compared to the initial control (non-reduced and non-crosslinked) GO/PES membrane.